Hello everyoneI have a fortimail unit configured in transparent mode
located opposite the mail server in the same DMZ subnet.After
configuring the unit to be able to handle both incoming and outgoing
mail traffic, both via webmail and clients (outloo...
Hi, I have this problem related to my Fortimail unit.I have installed
the fortimail unit in front of a zimbra mail server in transparent mode,
on the same DMZ subnet and obviously behind the fortigate.Incoming
connections are coming from port 1 confi...
I attach here the logs (message column) of the two different attempts to
send scans via printerThat is, from the printer a user presses scan and
sends the aforementioned to a domain email address (usually his own) so
that he gets an email with the sc...
From the zimbra logs I see that the emails show up with HELO
fortimail.example.comBut this also happens for mails arriving from
192.168.0.X/24Which then in theory should receive the same type of
messageOn zimbra we added the record that links back to...
Hi thanks but I have already read this guide and configured the
fortimail unit correctly, in fact all connections work.As explained
above the problem exists only for SMTP conections sent by the printers
from the districts of my network.(e.g. 192.168....
I solved the issue, basically I had to enable the proxy even for
outbound sessions which are handled by a separate entry in system->mail
setting->proxyNext I created an SMTP authentication profile that would
send back to my server on port 465 enablin...
As described earlier my fortimail unit is in transaprent mode, installed
in front of the zimbra mail server via a physical NIC on port 3, while
on port 1 it connects to the fortigate.
