I have a new Fortigate 60F that I am setting up. I upgraded the firmware
to 7.2.1 and then used the web GUI to restore factory settings to give
me a fresh base to work from. After the factory reset, I can see that
the 60F is acting as a DHCP on the n...
@sllu I ended up solving the problem (at least a work around) by
reallocating one of the LAN network ports as the WAN port. Works fine
now and not using the original WAN port. Still no idea why the marked
WAN port didn't work.
Thanks for replying @gfleming. Have just resolved the issue as below.
Was able to connect to have multiple devices receive IPs from the DHCP
and none were able to connect to the web-GUI despite trying in multiple
browsers. I was connected via a bridg...