Hi, Anyone had done this setup before.Fortigate firmware 7.2.5Standalone
unit using dedicated mgmt port for these services: syslog, ntp, tacas,
ssh, snmp, onboard fgt to fmg. We followed those references below but
the one using the vrf and creating a...
Hi All, I had found the CPU threshold and its alert but for the memory.I
had found a few but did not understand this trigger event in the
automation for memory. Automation > Triggermemory conserve mode entered
memory conserve mode exitedWhat is this ...
Hi, Recently I upgraded FG401E firmware to 7.2.5.But i tried to connect
SSH via FGT CLI, it had this error. FGT-FW1# exec ssh
usercisco@192.168.0.234Unable to negotiate with 192.168.0.234: no
matching key exchange method found. Their offer:
diffie-he...
Hi, Does anyone have any solution or idea on this? Standalone fortigate
on 7.2.5.Added the TACACS configuration as per the guide in this forum.
When we check the route, it is passing through another data port, not
the dedicated mgmt port.I had found ...
Hi @dbhavsar There is no ha configured for this standalone setup. Even
though we solved the tacacs+ issue using dedicated management
(dmgmt-vdom, which is automatically created when enabling dedicated
management) but the syslog and ntp still remain i...
Thank you for the immediate assistance. I will try it out in our lab
with those articles and do a network stress test on the FortiGate as a
simulation.
Hi guys,I tested on firmware 7.4 and 7.2.5 to automate to send to ftp is
working for %%date%% but if add the time script %%time%% , it failed. I
using filezilla server on Win Server. The action I had set is using the
CLI Script. CLI Script/fgt-%%date...
