Description This article describes how to handle a situation where SSH
to the FortiSwitch is not possible and regenerating SSH host keys via
ssh-regen-keys is the only option. Remotely accessing the managed
FortiSwitch requires SSH to the FortiSwitch...
Description This article describes the configuration sync error (E flag)
in FortiSwitches and how to troubleshoot the issue. For an example, see
the following command output: FortiGate # execute switch-controller
get-conn-status SWITCH-ID VERSION STA...
Description This article describes how to troubleshoot a scenario where
the Radio 3 channel is '0', and an error shows an 'Empty hw_chan list'
on a managed FortiAP. High-end FortiAP models like the G series and K
series have 3 radios to serve wireles...
Description This article describes how to configure and use a duplicate
SSID. In Fortinet’s Wi-Fi architecture, the wireless controller can use
the same SSID name (the broadcasted wireless network name) in different
SSID objects/profiles and map them...
Description This article describes how to check and troubleshoot
incorrect information sent to the syslog server by FortiExtender. For
example: FortiExtender is sending the correct hostname to the syslog
server (Sending Serial number instead of the h...
Hi. According to the R&D ticket : 0883512 1) Check the ForitAP profile's
auto-power-target setting which should not be empty. # config
wireless-controller wtp-profile edit "FAP231F-Test"config platformset
type 231Fset ddscan enableendset handoff-sta-...
Hi, 1)Keep DARRP disabled on AP profile radios. 2)Disable 802.11v
assisted roaming and 802.11k assisted roaming on the SSIDs Ref doc :
https://community.fortinet.com/t5/FortiAP/Troubleshooting-Tip-Error-while-adding-8-SSIDs-per-client/ta-p/341480