Description This article describes that it is sometimes required to
manage FortiSIEM components (Supervisors, Collectors, and Workers) using
an external IT Monitoring platform. By default, the SNMPD service is
installed on any nodes but it is disable...
Description This article describes how to configure custom listening
ports on a Collector to receive logs through the syslog protocol. Scope
FortiSIEM Solution Open a console or SSH connection to a Collector and
follow these steps: Edit the /opt/phoe...
Description This article describes some situations where FortiSiem
wrongly maps the Collector type value. Specifically, FortiSiem is
recognizing a 500F hardware collector as a VM Collector type.
Unregistering/re-registering the collector does not sol...
Hi I configured an Explicit Proxy on a Fortigate appliance. Fortigate
use FSSO for remote users authentication and it has tree main
interfaces: 1 LAN interface on which explicit proxy is configured and 2
WAN interface. My goal is that User A proxed t...
Hello @Furqan_Ahmed , it seems you receive an HTTP 403 - Forbidden Not
Authorized response from Worker. You should check first of all the
services status on Worker (execute phstatus command from CLI) and then
investigate /opt/phoenix/logs/phoenix.Log...
If you configure a Vlan on a physical interface and then connect a PC to
that interface, you need to configure vlan tag too on PC, otherwise it
will not works.
Hello, did you check the port speed and duplex? Are you connecting your
Pc directly to LAN port? What about pinging the ip address of lan
interface? Do you have huge packet loss? In this case maybe an RMA is
recommended.
