Description This article describes how to disable the Link-Local
Multicast Name Resolution in FortiGate Interface. Scope FortiGate.
Solution Link-Local Multicast Name Resolution is the protocol that
allows IPv4 and IPv6 hosts on a local network to re...
Description This article describes a situation where Fabric devices
(FortiSwitch in this example) may show the error 'Upgrade Failed' or
'Upgrade Incomplete' in the FortiGate under GUI -> System -> Firmware &
Registration -> Fabric Devices. Scope For...
Description This article describes the configuration of SSO admin access
to FIPS-CC Certified FortiGate using FortiAuthenticator as IDP. Scope
All FortiOS and FortiAuthenticator versions Including FIPS certified
FortiOS versions. Solution All the IP ...
Description This article describes how to resolve an issue where users
are not able to add Fortinet Devices to 'Decommissioned Units' in the
Fortinet support portal. Scope All supported Fortinet Devices, all
supported Firmware versions. Solution The ...
Description This article describes how to add the management interface
to the FortiGate Policy. This is mainly used for routing when
devices/servers are behind the MGMT interface and users cannot create a
policy to reach those servers. Scope FotiGate...
Hello bkarankar,Does it work if you remove the UTMs from the Fortigate
Policy?I would check the Application control Logs and see which
Application is blocking these extensions. Mostly it will be in Proxy. If
you do not find the signatures then you ca...
Hello Liza1, Kindly follow these articles for Traffic
shoppers:https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/107907/limiting-bandwidth-with-traffic-shapinghttps://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-apply-traffic-sh...
Hello @oneil1987,KIndly use this article for the redundant internet.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Redundant-Internet-connection-without-load/ta-p/197694In
this article, Port 1 is considered dark fiber and Port 2 is consid...
Hello @mrflow1 To download a log file: Go to Log View > Logs > Log
Browse and select the log file that you want to download. In the
toolbar, click Download. In the Download Log File(s) dialog, configure
download options: In the Log file format dropdo...