Technical Tip: Block opening YouTube advert links ...

Nishtha_Baria · 12-22-2024

Description This article describes how to resolve or keep the FortiGate's Firmware information up to date in the Software Lifecycle section. Scope FortiGate. Solution In some scenarios, the FortiGate is the latest version but the information on the S...

Nishtha_Baria · 12-12-2024

Description This article describes how to resolve the SSL VPN connection error when the credentials and the SSL VPN setup are correct when FortiGate is in FIPS mode. Scope FortiGate. Solution The SSL VPN may not function as intended in some situation...

Nishtha_Baria · 11-25-2024

Description This article provides an example of how to clone a site to site IPsec tunnel when one tunnel is created for a wan interface and need clone same for other wan interface. Scope FortiGate. Solution There may be a situation where an IPsec tun...

Nishtha_Baria · 11-23-2024

Description This article describes why one of the Phase 2 selectors is not present in the IPSec monitor. Scope FortiGate. Solution In some cases, an IPSec tunnel may include more than one phase 2 selector. The IPSec monitor can be used to confirm tha...

Nishtha_Baria · 10-31-2024

Description This article explains how to use the Require 'Group Name' on VPN client option when constructing an iOS dial-up tunnel in order to add a peer ID. Scope FortiGate. Solution The following example showcases a scenario where the option Requir...

Nishtha_Baria · 09-26-2024

Hello @AeroSpaceAdmin, On Azure FortiGate the External subnet, Internal subnet and Protected subnet is just a way Azure and FortiGate understands the subnet. External Subnet: External subnet used to connect the FortiGate-VM to the Internet. Internal ...

Nishtha_Baria · 07-23-2024

Hello Tobi, It looks like a policy issue. Please check if you have a firewall policy to allow to this vlan. Also if you are using split tunnel please verify on your SSL VPN portal if there is any other routing address added then you will need to add ...

Nishtha_Baria · 02-01-2024

Dear Customer, If you are observing packet drops on your FortiGate it would be best to create a ticket with TAC as an engineer can have look and take some real time debugs and packet capture to get to find the root cause of the issue. -NB

Nishtha_Baria · 09-08-2023

Hello Oibekk, To allow all local lan subnets, you have to make sure that you add the subnets in the firewall policy as destination. And if split-tunneling is on you will also have to add these extra subnets in phase1 and in address group. config vpn ...

Nishtha_Baria · 09-05-2023

Hello Omkar, You can also follow this Technical Tip to block the LinkedIn Jobs which has some more URLs so that you can completely block. https://community.fortinet.com/t5/FortiGate/Technical-Note-How-to-block-LinkedIn-Jobs/ta-p/271596 Thank you, Nis...

User Statistics

User Activity

Technical Tip: How to keep Firmware information up-to-date in Software Lifecycle in Asset management

Technical Tip: Behavior in FIPS mode when the ssl.<vdom> interface is administratively down

Technical Tip: Cloning IPsec tunnel for other WAN interface

Technical Tip: Phase 2 selector is not showing up on IPSec monitor

Technical Tip: How to add peer id to iOS Dial up tunnel

Re: Azure FG Cloud Deployment and Existing VNETS

Re: After changing a VLAN ... SSL VPN traffic is no more working

Re: packet dropped issue on fortigate 30E lan ports

Re: Unable to reach printer on local network with dial-in ipsec VPN

Re: Need to block linkedin Jobs

Technical Tip: Block opening YouTube advert links ...

Re: Azure FG Cloud Deployment and Existing VNETS

Re: After changing a VLAN ... SSL VPN traffic is n...

Technical Tip: Troubleshooting FortiGate Threat Fe...

Technical Tip: Parsing Epoch Time in Milliseconds ...

KCS