Re: Fortigate no Matching IPsec Selector error

JLopezM22 · 07-06-2022

i'm trying to fix the following comunication between:Config VLAN-OBIS-DMZ: Spoiler (Highlight to read)SS-01 (root) # show system interface VLAN-OBIS-DMZconfig system interfaceedit "VLAN-OBIS-DMZ"set vdom "root"set ip 192.168.77.1 255.255.255.0set all...

JLopezM22 · 07-05-2022

Hi everyone We're trying to connect 2 sites with an VPN IPSEC. with the tunnel up and working. we have the next issue: Scenario:Triying to connect 192.168.0.102 --> 10.58.152.10Having the following issue: Anyone can help please?

JLopezM22 · 07-06-2022

Finally solved restoring backup :)

JLopezM22 · 07-06-2022

About my last post, finally we restore a backup and works for one issue.

JLopezM22 · 07-06-2022

I mean, the snat to 10.10.10.1 is the physic dmz interface and is disables on the fgt. The static route, was a misstake now solved forgot delete it :)

JLopezM22 · 07-06-2022

Thanks for your reply toshi, The 192.168.77.0 was a test static route that i must delete. I already have the rule Spoiler (Highlight to read)SS-01 # config vdomSS-01 (vdom) # edit rootcurrent vf=root:0SS-01 (root) # config router staticSS-01 (static)...

JLopezM22 · 07-06-2022

Thanks for your reply Yes i have configured the following in the phase2: local address: 10.58.152.0/24remote address: 192.168.0.0/24 the snat is 10.10.10.1 is the physical dmz interface and is disabled.

User Statistics

User Activity

Fortigate no Matching IPsec Selector error

error - reverse path check fail, drop

Re: error - reverse path check fail, drop