Hi, Migrating from Static routing to BGP and adding a second MPLS and
I've only used RIP.So when the primary WWW & WAN were to fail we.d
failover to Secondary WWW &WAN. We don't have control over the Primary
and secondary routers, just our FortiGate,...
Hi We will be advertised only the default route from our ISP Via Two
public-facing interfaces Primary_ISP_WWW (vlan 810) & Secondary_ISP_WWW
(Vlan811)We will receive all our WAN interconnected Site routes via the
Two WAN interfaces Primary_ISP_WAN (V...
Hi, No, we only have 1 FortiGate (HA Active-passive). This is connected
to two Different managed internet connections.Primary and secondary
(failing over to secondary is Primary was to fail) I Asked Fortinet
support and no help what so ever just clos...
If I add this config to the above... Would this advertise the required
below routes to my ISP get | grep network-import-check
network-import-check: enable config router bgp config network edit 1 set
prefix 201.x.x.24 255.255.255.248 next edit 2 set p...
Hi, I've updated the config below to include the default route. If this
is correct? I need to make sure the following also
work[ul]Secondary_ISP_WAN (Redistribute Our Connected Networks to
neighbors) & receive all routesPrimary_ISP_WAN (Redistribute ...
