On my FG firewall I have defined MGMT as OOB / dedicated management, and
the firewall is in L2 / Transparent mode. One interface PORT1 from
firewall is connected to the switch VLAN-1 and MGMT on the same switch
VLAN-1. In this case is there a possibi...
I need to create a VDOM (named it VDOM-A) which will operate in
Transparent mode with two interfaces. I want to set all firewall
management using Root domain on MGMT with out of band. Is it mandatory
to assign an IP address to VDOM-A at any level? In...
I have a firewall configured on Transparent mode (two interfaces, inside
and outside). Also I have a MGMT interface connected to the same vlan.
In this case can it form L2 Loops? What is best practice?
I have defined MGMT as OOB dedicated management, even after this setting
it forms L2 loop. Is it the normal behavior when the firewall in L2 /
Transparent mode? Further I am unable to define VRF for interfaces in
Transparent mode.
As per the article it seems like FG will allow dynamic traffic. Is there
anyone practically implemented this for Windows systems between Domain
Controller and Clients? That is, without allowing dynamic port range,
all functionalities work fine for Ac...
