Description This article describes and explains an issue where a
FortiGate 1800F/1801F platform generates 'interface-stat-change' system
event logs after an upgrade to 7.0.14/7.2.8. Scope FortiGate
1800F/1801F. Solution The following logs are generat...
Description This article describes the new anti-spoof IPsec VPN logic
that was introduced in FortiOS7.4.2. If proper conditions are not met,
the traffic may be dropped as 'anti-spoof check failed, drop'. Scope
FortiOS 7.4.2+. Solution Starting 7.4.2,...
Description This article describes how to fix an issue where the 'set
wccp enable' CLI option is not available on an EMAC-VLAN interface.
Scope FortiOS v6.4, v7.0, v7.2, v7.4. Solution WCCP configuration is not
supported on EMAC-VLAN type interfaces....
Description This article describes the FortiGate alt-primary DNS server
feature and its configuration. Scope FortiOS 7.0, 7.2, 7.4. Solution
alt-primary and alt-secondary servers are configurable from the CLI.
config system dns set alt-primary {ipv4-...
Description This article describes FortiGate’s DNS query behavior when
multiple DNS protocols are enabled. Scope FortiGate v7.0, v7.2, v7.4.
Solution Multiple DNS protocols are enabled under Network -> DNS.
Fortigate DNS query behavior is influenced ...
Hey Phill, The very first re-direct for captive portal is always the
":1000/fgtauth" or ":1003/fgtauth". The cert
used to host that page is set here
https://community.fortinet.com/t5/FortiGate/Technical-Note-How-to-change-the-Captive-Portal-certifica...