DescriptionThis article addresses the configuration where clients are to
connect to SSL VPN using both their domain credentials and SSL user
certificate.It does not cover general SSL VPN configuration and LDAP
configuration/integration in the FortiGa...
Description This article looks at the effect of BGP synchronisation rule
on learning BGP routes from the BGP peer. It basically states that
unless and until a route is present in IGP table, the FortiGate will not
advertise BGP route to the BGP peer. ...
DescriptionThis article explains how to access the natted server
internally with the Public IP/Virtual IP.SolutionStep 1: Configure
VIPLog in to the GUI and go to Policy & Objects > Objects > Virtual IPs
> Create new, set the following parameters:Nam...
DescriptionThis article explains how to set up a DLP security profile to
log attachment information sent in an email.SolutionGo to Security
Profiles > Data Leak Prevention and create a new filter (For example,
Microsoft Office for word files).Add the...
Hi, Its possible that a VIP is configured on either of the firewalls for
the external public IP on which the IPsec tunnel is terminated. Please
check and remove the VIP if any. Regards,Deepak
Hi, You can simply create a policy route for each source subnet and then
selecting corresponding outgoing interface / gateway according to their
primary ISP. To create policy route in GUI, go to router > static >
policy routes. In this case if the pr...