Hi All,Good Day. I have some issues with FSSO where it is not hitting
the firewall policy and traffic is getting denied. My setup:- I have a
DC agent installed on the DC server itself. - A collector server
(Separate)- TS Agent installed on Citrix. Is...
Hi All, I am in need with some assistance. I am looking to enable "Full
VPN Tunnel" for VPN users and control what they access based on security
groups from AD. I have got the VPN working with Azure SAML
authentication.However the users are not able ...
Hi Everyone, I am requesting assistance on a FortiGuest Issue as I have
not been able to get the right outcome with this issue. Issue:
FortiGuest (standalone VM) is configured to host Guest Portal. The guest
portal functionality works fine. The issue...
Hi Team, I am looking for some advise on the logs that we are seeing on
my firewall. Firewall is a VM hosted in Azure.FGT Version 7.0.11
Problem:User tries to login to server that is hosted in the DMZ (Azure)
using LDAP and it takes approximately 1-2...
Hi Team, I am in need of some assistance on an issue with wireless
clients in my environment (ALL FORTI Devices). Clients when roaming from
1 AP to another seems to get disconnected (althought it says connected
on their machine) and when checked the ...
Hi @jdelafuente_FTNT @Stephen_G , Thank you very much for the
response.After a lot of troubleshooting, the issue was found to be
caused by an overlapping agent ( we had a Palo Alto TS Agent) on the
same server. The server for some reason were sending...
Hi @jbackstrom @Markus_M ,Do you know if this feature is now supported
on version 6.6.2 or any other version that may support it?Appreciate if
someone can assist.
Hi @irixis, I did go through a lot of changes in the environment to fix
this issue.However the good news is that there is a fix for this issue
on the latest firmware for the AP.The current firmware we are using
would be 7.0 build0146.Other things tha...
Hi @JakeBlues , Did you manage to solve it?I have a similar problem
where I have a NAT of port 443 to an internal server and it uses the
same port on both firewall but once failover it does not work because
the firewall A NAT is above the Firewall B ...
Thank you @mauromarme.I have multiple group in the AD for instance like
the below and they will have to go out via the corporate Internet for
that - in that event how can I do it.Apart from that I did observe some
documentation that we can send the l...
