Description This article describes how to upgrade a FortiNAC-F setup
running NAC-OS using an interim build image. The procedure is used to
upgrade the firmware to a version suggested and offered by the TAC
support team, mainly for testing new feature...
Description This article describe how to use events and audit logs in
cases when a new issue arises on an existing setup that was previously
working normally. This also applies for an intermittent issue that
appear at specific time only. Scope FortiN...
Description This article describes that in authentications that include
MSCHAPv2, the Winbind tool needs to be configured and FortiNAC must be
joined to the domain for the authentications to succeed. Scope FortiNAC,
Windows Server AD. Solution In lat...
Description This article describes that since the product FortiNAC
Analytics Reporting is discontinued, FortiAnalyzer is recommended as a
reporting platform. These details are covered in the Administration
guide. Scope FortiNAC, FortiAnalyzer. Soluti...
Description This article describes that in FortiNAC integrations with
Meraki switches (cloud-managed) some RADIUS reauthentication may happen
randomly. This will disrupt the connection in the end hosts (a few
seconds between the re-authentication). S...
According to FNDN documentation the URL seems correct but the password
parameter should be changed to passwd If not joined yet I would strongly
suggest you to join the developer network. Two sponsor approvals are
needed and your Fortinet local repres...
Have you added the /portal as part of the URL at SSID configuration and
is the FAC added as exemption te be reached by the hosts that are not
yet authenticated? You need to add also the Access Points subnet under
Portal configuration in FAC. Helpful ...
As mentioned this is a limited scenario, for this to work you need to
dedicate a switch to connect these hosts that have static IPs and use a
single VLAN for Registration and production (the switch will work more
like a hub, no VLAN switching). The n...
I searched internally and actually there is a NFR filed: "Cynet EDR
support" but it's not yet implemented in FNAC. You can contact your
local Fortinet representative and refer to this ticket to speed up the
integration process.
Firstly, this communication is not needed in the first place. Isolated
host need to communicate only with the isolation interface of FNAC. Why
does the isolated host need to reach the management IP of FNAC in this
case? Even if there is no firewall p...