Re: Web Filtering- Slow page loading.

ap · 08-24-2024

Description This article describes how to restrict traffic using a firewall policy when there is a need to allow traffic from only a specific source port or source port range for a specific service. Scope FortiGate. Solution This article has restrict...

ap · 08-08-2024

Description This article describes how to stop FortiLink discovery between two FortiSwitches which are managed by two separate FortiGate firewalls. So that, only specific FortiSwitches show up under managed FortiSwitches on their respective FortiGate...

ap · 07-28-2024

Description This article describes the case when trying to register to FortiGate to FortiCare through FortiGate GUI, the user needs to select the correct reseller from the dropdown menu. However, sometimes this option keeps on spinning and does not s...

ap · 09-17-2023

Description It is possible that FortiGate might block Windows updates due to security profile inspection by an Antivirus profile, Web Filter profile, or Application control profile. This article describes how to allow only Windows updates without mak...

ap · 11-22-2024

Hi @ashik_k , I don't think this is possible. You must configure login for separate devices separately. Regards, Ankit

ap · 11-21-2024

Hi, This issue might be realted to already referenced known issue 1015698 in the release notes of FortiOS v7.4.5: https://docs.fortinet.com/document/fortigate/7.4.5/fortios-release-notes/236526/known-issues Regards, Ankit

ap · 11-17-2024

Hi @Lui13 , You can try to traceroute or ping the device with IP address from fortigate CLI. On your windows machine, you can check if there is another device with same IP address and find out which device that is using MAC address. You will need to ...

ap · 11-16-2024

Hi, Please check if you are able to resolve the same domain host without the suffix from fortigate CLI itself. It should work from fortigate Cli itself before it works from IPSEC dial up VPN. If it doesn't work, please check your DNS configuration on...

ap · 08-30-2024

Hi @usmansa1 , Administrative access allows you to configure general protocol specific access to fortigate over specific interface. However, Local-in policy allows you to control it with more granularity. For example, you can configure local-in polic...

User Statistics

User Activity

Technical Tip: Restricting Source port of the traffic for specific service

Technical Tip: How to stop FortiLink discovery between two FortiSwitches managed by two different FortiGates

Technical Tip: Reseller option keeps spinning when trying to register to FortiCare through FortiGate GUI

Technical Tip: How to allow Windows update blocked by FortiGate

Re: Multiple logins for a single user with a Captive Portal

Re: Problem with SFP on ULL ports after upgrade from 7.2.9 to 7.4.5

Re: Client Windows Remove DHCP due to Conflict

Re: FG90G 7.0.16 issue on DNS Suffix on IPSEC vpn remote access

Re: Difference between firewall local-in policy and general administrative access

Re: Web Filtering- Slow page loading.

Technical Tip: How to allow Windows update blocked...

Re: FG90G 7.0.16 issue on DNS Suffix on IPSEC vpn ...

Re: Firmware for Fortigate-60D

Re: VIP using Static IP from WAN1, but shift Outgo...

Re: Virtual Webserver in ESXI over the Internet

KCS