Technical Tip: Clients not able to ping gateway wh...

yabhishek · 01-28-2025

Description This article describes how to troubleshoot if a managed switch by FortiLink is losing config. Scope Managed FortiSwitch. Solution The issue where FortiSwitch loses configs (For Ex: VLAN config, speed...etc) after reboot or periodically, v...

yabhishek · 01-17-2025

Description This article describes how to troubleshoot the issue when mac-address is not getting learned on the port. Scope FortiSwitch. Solution In some scenarios, while moving a client from one port to another, the switch does not learn the mac-add...

yabhishek · 12-24-2024

Description This article describes how to process if clients are not able to ping the gateway when Block Intra-Vlan traffic is enabled on the VLAN. Scope FortiSwitch is Managed by FortiLink. Solution In some scenarios when Block Intra-Vlan traffic is...

yabhishek · 12-24-2024

Description This article describes the best practice for using two collectors to capture the mirrored traffic. Scope FortiSwitch. Solution In some scenarios, in which multiple port mirroring instances are created, then two collectors cannot collect t...

yabhishek · 12-23-2024

Description This article describes the maximum length allowed for VRF names on FortiSwitch. Scope FortiSwitch in Standalone mode. Solution While creating VRF, make sure that the names of the VRF instances should not exceed the length of 15bytes: For ...

User Statistics

User Activity

Technical Tip: Managed switch losing configuration

Troubleshooting Tip: Port not learning mac-address