Hello friends, I am facing a problem with FortiWeb Cloud because it
blocks my ports at the time of DNS record change, I need to allow ports
80, 8081 and 9090 (the latter with HTTPS certificate)The problem is that
in the Endpoints module, the option t...
Hi, My name is Armando and I have a problem, is next. I have a FortiGate
500D with FortiOS 5.6.2, I created a VPN IPsec DialUP and I want to
connect by Linux (Fedora 27), I download the client from
https://support.fortinet.com/Download/FirmwareImages...
hi, my name is Armando from CDMX, I have a doubt, regurlay you enter the
cli and you see, for example FG100D # Today enter the CLI and I see
FG100D $ They know because the $ sign replaces the #, Regards,
hi, my name is Armando, from CDMX I am facing an problema, I wan to
return to factory values a FAZ 2000B, I execute the command "execute
restore image tftp FAZ_2000B-v5-build0724-FORTINET.out 192.168.2.137"
and only updates the FAZ 2000B, does not re...
hi, good morning, I am facing a serious problem with a FortiAnalyzer.. I
can not access by https after a very strong storm in the CDMX. I hava
accees by ping, ssh and telnet but not by https I need help please,
Hi Shafiq.Do you know if there is any alternative, some bypass, what I
mean is that it only protects port80 for example and the other ports
8081 and 9090 only let them pass Armando Gómez
hi Shafiq.It could be a solution, the detail is that the license was
purchased to protect 1 website, so I understand I should then change the
license to 5 websites to be able to protect these 3 applications 80,
8081 and 9090, it's right?
hi Farina Ahmed,When you get to the Endpoints module, the option is not
enabled, it only allows you to put a single port, between 80, 80881 or
9090.The problem is that by leaving a single port, the others are
blocked. Armando Gómez
