Technical Tip: Configuring the FortiGate to use th...

RBA · 10-25-2024

Description This article describes how to fix the application access issue which requires authorization. Scope FortiSASE. Solution The issue is most commonly noticed with oracle application or URL access. Authorization request can be verified leaving...

RBA · 10-18-2024

Description This article describes how to fix the FortiSASE VPN connection issue with FortiAuthenticator used as authentication server. Scope FortiSASE. Solution VPN connection gets stuck at 45% and the following log will be present under Analytics -...

RBA · 09-24-2024

Description This article describes how to configure a split tunnel to bypass FortiSASE using the local application and verify in endpoint. Scope FortiSASE, FortiClient. Solution Local application that has to be bypassed can be specified by their name...

RBA · 09-23-2024

Description This article describes how to fix the SAML authentication issue when it fails with the error log 'Missing user-name' in event logs. Scope FortiGate. Solution The issue arises when the username attribute is not properly configured. Configu...

RBA · 09-19-2024

Description This article describes how to bypass FortiSASE based on an On-Fabric detection rule based on the Public IP. Scope FortiSASE. Solution Endpoints which are behind these public IPs should have a standard level of on-premise security and ther...

RBA · 10-28-2023

Newer versions are always preferred as it would have the most recent bug fixes and features available. Please go through the known and resolved issues in the release notes to avoid hitting any known issues that would impact you network. Known Issues:...

RBA · 09-27-2023

Hello, I hope you have tried running the installer as administrator. Can you give full access to the user/administrator and try installing again.Also try this execute CMD -> run as admin Run >> sc stop fortishield >>Verify fortishield is stopped >>Cl...

RBA · 07-20-2023

Hi Pawel, Help me with the current firmware version FMG is in. If its 7.2.1/7.2.2 then as per my understanding we do not have an option to disable it however as a workaround you can create and use a new admin profile (local or remote) without read/wr...

RBA · 07-20-2023

Try with below command diagnose test authserver radius "RADIUS SERVER" mschap2 username password Server_name indicates the value of "name" field configured under FortiGate Radius Profile. Also share the output of command "sh full-configuration user r...

RBA · 07-19-2023

Hey OJazem, so what is the FortiGate model and firmware version?. Also did we try to edit/configure the policy from CLI?. To give a proper reply we would have to look into the httpsd debugs while recreating the issue. Below link can help with the err...

User Statistics

User Activity

Troubleshooting Tip: Troubleshooting application access issue via FortiSASE which fails at authorization

Troubleshooting Tip: FortiSASE VPN connection stuck at 45% with event log 'sslvpn_login_no_matching_policy'

Technical Tip: How to bypass local application using a split tunnel in FortiSASE

Technical Tip: The SAML authentication fails with the error log 'Missing user-name' in event logs

Technical Tip: How to bypass FortiSASE when the endpoint is on-net using Public IP

Re: 7.4.1 Ready?

Re: Error trying to install FortiClient 7.2.1 on single user pc

Re: FortiManager ver. 7.2.x

Re: Unable to connect to my Radius Server . Test connectivity settings on Fortigate primary server f

Re: FortiGate failed to create policies through VPN

Technical Tip: Configuring the FortiGate to use th...

Technical Tip: How to identify egress public IP of...

Troubleshooting Tip: NTLM authentication failure (...

Re: Error trying to install FortiClient 7.2.1 on s...

Re: Unable to connect to my Radius Server . Test c...

Re: Unable to connect to my Radius Server . Test c...

KCS