Description This article describes how to resolve a common error
encountered while configuring an IPsec dial-up tunnel on FortiGate when
mode-cfg is enabled. Scope All FortiGate firmware version. Solution When
mode-cfg is enabled, FortiGate acts as a...
Description This article describes the necessary FortiGate configuration
changes for integrating the 3CX Phone System with a network. Scope All
FortiGate Firmware. Solution Traffic flow would be as follows:
Lan-------------Fortigate(wan)-----------3C...
Description This article describes that if the FortiGate is acting as a
DHCP-relay and if the switch is the downstream device, it is possible to
encounter the error 'can't get server id from client message'. The
reason is that the PC not getting an I...
Description This article describes how to resolve the
'system/interface/fortilink/allowaccess : cannot change allowaccess if
when fortilink is enabled' error in FortiGate/FortiManager. If it is
desired to add administrative access in FortiGate or via...
Description This article describes how to resolve an error encountered
with an IPsec tunnel between FortiGate to a Third Party device:
'INVALID-HASH-INFORMATION'. Scope FortiGate. Solution We may encounter
the above error when PSK is mismatched or wh...
Could you please share the forward traffic and debugs logs. You can run
following command on Fortigate: diag debug flow filter addr X.X.X.X
Y.Y.Y.Y and diag debug flow show function enablediag debug console
timestamp enablediag debug flow show iprope...
Hello, FortiGate does not have a built-in feature that provides CLI
output of every change like Cisco ASA does with its "commit" commands.
However, you can enable admin activity logging to capture configuration
changes in FortiGate’s logs. This will ...
Hello, Kindly check and edit the computer registry to enable TLS 1.3:Go
to
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols
If 'TLS 1.3' is not displaying as a child path under 'Protocols', create
it. 'Right-c...