Description This article describes the steps to resolve BGP SNMP polling
issues on FortiGate devices. The issue is caused by the FortiGate using
a non-standard OID for the local AS value, which can be resolved by
disabling the 'append-index' option i...
Description This article describes how to retrieve traffic volume for
specific policies for auditing or troubleshooting on FortiGate when
FortiAnalyzer or FortiManager is not available. It provides a
step-by-step guide on SNMP to obtain the required ...
Description This article describes the behavior where a Standalone
device in the Fabric, which is connected to FortiSwitch, cannot be
upgraded individually without upgrading the FortiSwitch. Scope
FortiGate. Solution When selecting Upgrade under Syst...
Description This article describes behavior where the gateway for the
routes pushed by split tunnel configuration show as the next IP in the
IPsec VPN Client Range. Scope FortiOS. Solution This is expected
behavior. By default, the IPsec connection d...
Description This article describes the event that occurs when no logs
are displayed on the FortiGate when traffic Ingresses and Egresses from
the same interface. Scope FortiGate-VM. Solution This is a common
scenario in Cloud or VM environments when ...
Good Morning @Katoomba ,There are no dependencies amongst individual
engines like App control to IPS Engine.But it is advised to upgrade all
entities under one engine IPS entities in this case as they include new
definitions and are updated more freq...
Hello @SVDB , This might require you to configure some multicast
policies, Kindly review the below two articles to achieve
this:https://community.fortinet.com/t5/FortiGate/Multicast-Configuration-to-Apple-TV/ta-p/197095Chromecast
example:https://comm...
Hello @ghbhaddar , There is no such known issue for SSL VPN on 7.2.8.
When you say interruption, could you please elaborate what was the
behavior this would help us determine what could have possibly gone
wrong.There has been code changes between 6.4...
Hello @SecurityPlus , This depends on how and where you have placed your
restriction. If you are talking bout host restrictions to connect to SSL
VPN, below link contains the cli references for this and you can also
see the group in
GUI.https://commu...