Dear All, I have following connection: CIsco Switch - SFP-10G-SR - om3
MMF cable 3 meter - FN-TRAN-SFP+SR - FortiGate 100F, X2 port. Previewsly
I used SFP-10G-SR on both devices, link was worked, bot after installing
FN-TRAN-SFP+SR link goes down.I h...
This sfp works with Cisco SFP-10G-SR-S, link and port-channel comes up,
but Cisco switch interface blinking with green and amber lights. I have
12 PC of Fortinet SFP, and their behavior are same. I also tried
manually configure speed and duplex setti...
Here is a log from yesterday:Interface status is noconnect.When port
goes UP, Cisco SFP inserted in FGT. May 15 10:02:39.854:
%LINK-5-CHANGED: Interface TenGigabitEthernet2/0/4, changed state to
administratively downMay 15 10:02:50.160: %LINK-3-UPDOW...
I try to show it:You can see interfaces status on image below. Now
installed Cisco SFPs in all devices.When I chane SFP on FGT, one of
interface of Cisco switch goes down.
Hi,Thanks for response.My topology is:Cisco Switch with installed
SFP-10G-SR,FGT100F with installed FN-TRAN-SFP+SR and OM3 MMF between
them.These communication have a problem - link status on cisco switch is
noconnect. Before I used SFP-10G-SR sfp-s ...
