Hi @HS08 I would start by checking if all BGP peers are up and routes
are received from the BGP peer spoke sites. You can do that with get
router info bgp sum. Make sure all of the peers are established and the
prefix is being received. you can see t...
Hi @KarlH For the Linux agents you will find them in the corresponding
folder where you would also download the FortiSIEM image. For example,
the agent can be directly downloaded from the 7.3.1 FortiSIEM folder:
For the windows agent, there is a spec...
Hi @itjunior For information about the FortiManager API and how to use
it, you should refer to the Fortinet Developer Network (requires an
account): https://fndn.fortinet.net Thanks
Hi @AlexFerdissan Maybe the identity and location dashboard could be
helpful in this instance. FortiSIEM keeps track and can link users based
on various logs. Some of the behavior is supported by default if the
correct types of events are being recei...
Have you checked if you have a full adjacency? And check that it is not
changing between full and 2way? You can check it with the following
command: get router info ospf neighbor Also check that you don't have an
MTU mismatch or duplicate router-id's
