Description This article describes that FortiGate blocks the TCP-null
packet by default. Scope FortiGate. Solution TCP-Null packet series of
TCP packets that contain a sequence number of 0 and no set flags.
FortiGate blocks TCP null packets by defaul...
Description This article describes how to troubleshoot if the internal
DNS server fails to resolve any FQDN. Scope FortiGate, Window Server.
Solution Problem Statement: FortiGate is configured with an internal DNS
(primary) server and a FortiGuard se...
Description This article describes how to use Blackhole to control
SD-WAN traffic failover. Scope FortiGate. Solution Forward traffic as
below: From 10.0.xx.10 to 8.8.8.8 via WAN1 only. From 10.0.xx 11 to
1.1.1.1 via WAN2 only. Expected behavior: Onc...
Description This article describes that the FortiCloud portal shows
license expiration even though the contract has been renewed for
appliances. Scope FortiGate, FortiCloud. Solution The user renewed the
contract for two FortiGates. FGTXXXXXXXX788 FG...
Description This article describes if the FortiGate has a feature to
hide DHCP server IP. Scope FortiGate. Solution There is no way to
configure FortiGate to not reflect the DHCP server IP when the user
performs an 'ipconfig /all' on a Windows machin...
Hi there, Please see if the article here fixes your issues.
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Lost-internet-connection-when-connecting-SSL/ta-p/286345#:~:text=To%20resolve%20this%2C%20either%20create,once%20VPN%20connect...
Hi, Two way here, but its all depend on your requirement at last. Idea
is just to route/allow the traffic through required port. - You may find
article here to configure port forwarding using VIP for any custom
ports.
https://docs.fortinet.com/docume...
Hi, - whether it is sslvpn web mode or tunnel mode? - You may verify the
setup sslvpn with ldap by referring to doc link here.
https://docs.fortinet.com/document/fortigate/6.4.2/administration-guide/115783/ssl-vpn-with-ldap-user-authentication
- what...
Hi, You may refer link here to find out possible cause for route not
advertise to the neighbor.
https://community.fortinet.com/t5/FortiGate/Technical-Note-Common-issue-when-trying-to-advertise-a-subnet-to/ta-p/193295
https://community.fortinet.com/t5...
Hi, - if the failover WAN stop passing the traffic, check whether the
port Tx & Rx counters of the port incrementing.
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiGate-interface-error-counters/ta-p/190190
- Try to check if any...