Technical Tip: FortiGate HA upgrade procedure and ...

ChrisTan · 11-25-2025

Description This article describes an issue that occurs when configuring the RADIUS auth-type 'ms_chap_v2', which cannot be synced to the FortiSwitch. Scope FortiOS v7.4.8 +. Solution When the FortiGate needs to apply 802.1X authentication to the man...

ChrisTan · 11-12-2025

Description This article describes that after the upgrade to the Feature version, 'Use endpoints' system DNS' is no longer supported. Scope FortiSASE. Solution The new FortiSASE instance will support IPsec VPN instead of SSL VPN. Some SSL VPN feature...

ChrisTan · 10-21-2025

Description This article describes how to solve the Azure CLI Login Failure issue because the certificate verification failed. Scope FortiSASE. Solution The end user can not access the Azure CLI with the following error message: az loginSelect the ac...

ChrisTan · 10-19-2025

Description This article describes that the Radius setting may be missing after upgrading to 7v.4.8 Scope FortiGate v7.4+. Solution If a Radius configuration is present on the FortiGate, and it needs to push the 802.1x profile to the FortiSwitch usin...

ChrisTan · 09-22-2025

Description This article describes the Adaptive MFA rule, which allows bypassing the OTP by subnet range or Known devices. Scope FortiAuthenticator v6.6.3+. Solution Starting from v6.6.3, the FortiAuthenticator has the Adaptive MFA rule, to combines ...

ChrisTan · 08-17-2022

https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/724772/ssl-vpn-multi-realm This is the realm config example. The purpose of the realm here is to allow user login from different channels. You can apply with different portals that match dif...

ChrisTan · 08-17-2022

Does a realm + portal help in your case? If with no-domain PC, try https://wanip/byod byod is your new realm that also matches LDAP user but no registry key check. The new portal can help to achieve limited access and a different IP address.

User Statistics

User Activity

Technical Tip: The RADIUS auth-type 'ms_chap_v2' for 802.1x profile will not apply to the FortiSwitch

Technical Tip: 'Use endpoints' system DNS' is no longer available for FortiSASE new feature version

Technical Tip: Azure CLI login Failure issue with FortiSASE deep inspection

Technical Tip: Radius auth type and secret key for 802.1x profile changed post FortiGate upgrade

Technical Tip: Adaptive MFA rule allow users can bypass the OTP verification

Re: SSL VPN portal profile based Host check

Re: SSL VPN portal profile based Host check

Technical Tip: FortiGate HA upgrade procedure and ...

Technical Tip: DNS Filter Rating Servers 'Unreacha...

Technical Tip: How to check Azure the inherited (n...

Technical Tip: How to create FortiGate VM in MacOS

Troubleshooting Tip: DHCP relay issue

KCS

User Statistics

User Activity

You are leaving our website