Hi all, We have servers (Windows servers) that are in a 3 tier model and
therefore do not have Internet access. We want to do antivirus updates
on these servers via fortimanager and fortiems. I saw on the admin
guides the steps, here is attached: Con...
Hi all,I want to create a script which it send signals "0, 1 or 2" in
our checkmk when the license will be expired or not. However, few
Fortinet's equipment hasn't license detail in cli and we can't take the
expiration date in a variable. I want to g...
Hi all, I have a new FAC and I have changed the admin local user
password. Now, I can connect in CLI but when I want to connect in GUI
with the admin local user, I have an error. The error is: please enter
correct credentials. note that password is c...
Hi all,In FortiAuthenticator, we managed to import our windows Active
Directory with the "Remote User Sync Rules". However, we want to import
users in our UNIX LDAP (OpenLdap). Users for this LDAP are used to
connect in FAC GUI. Firstly, we have conn...
Hi everyone! I'm working in IT company, we just received 2 Forti
Authenticator 300F, we performed an update of the firmware on both, the
first one we managed to get it updated. tho the second one we are having
trouble with it.. We putted in the new f...
Hello,We had already done this on forticlient and fortimanager. Here are
the following screenshots:For FortiClient, we put the IP address of the
fortimanager with the port 9443. For FortiManager, we have enabled push
update and set the FortiEMS IP a...
Hi Elie,We have found the problem. We were in a HA cluster and our
equipment was the secondary member of the cluster. When you disable the
HA, the GUI login work.
Hi Elie,This is the main problem. I can't connect to the GUI of the
secondary member of the cluster through its HA Port (which is its
management port).
We are in a cluster between 2 FAC and we want connect to the GUI via
port4 (This is the port for HA). I want to connect in the GUI of the
secondary cluster member.How can I do it please?
