I use VMWare Dashboard to check availability for the ESXi and VMs. What
affects the color of the displayed graph? As an example of ESXi uptime?
Is it related to CPU and memory utilization or some other factors? In
the settings for each widget display...
I try to generate an Availability Report for the servers, Windows or
UNIX servers but I get no data. Does this require specific protocols
between FortiSIEM and the servers? Should I install an agent on the
machine to get the Availability Report, espe...
There are data in several places and several stages. During installation
FortiSIEM settings. In Admin>Ssettings, Admin>Device Support,
Admin>Setub and CMDB there are changes made. Also, hosts are added to
the "hosts" file. How do whole backup FortiSI...
I try to configure SNMP traps for FortiADC. I don't find "Alert" under
"System" in GUI. I used "config system alert-snmp-trap" but no traps are
received on FortiSIEM. Is there an extra configuration required?SNMP
Community is configured and worked in...
Here are what I got:In the settings for each widget display, some
elements are not clear. Does "Result Limit" means the number of elements
or lines?>> There may be 100 results, but you can limit number of
results to displayed on the widget which woul...
To troubleshoot FortiGate you use two things, your understanding of how
FortiGate behaves and the log. From the log, you could filter to see if
matched traffic is accepted then NAT applied and forwarded. FortiGate
first checks the routing and then th...
