Re: FortiOS 7.4.2- IPSec tunnel traffic flow stops...

ykenny · 09-14-2023

Hi, FAC masters, As the title, since the customer's Radius server sent syslog from different source IP addresses. So I have to set several IP as source as well, In case not miss any, can i just set it as 0.0.0.0 ?I found it could save, but not sure i...

ykenny · 02-01-2024

Still trying to look for document about this issue as well. My situation, i found some times change ike port could work around the issue, but still not sure the root cause, so finally, i chose to downgrade the hub back to 7.4.0, the issue gone. lol, ...

ykenny · 02-01-2024

I encountered similar issue. have you ever tried to change the ike port to check if Ok? config system setting set ike-port xxxx end But it's global parameter, be careful.

ykenny · 10-31-2022

Same issue here +1 with 7.2.2

User Statistics

User Activity

Does it work when i set the "syslog source" as 0.0.0.0 in FAC FSSO ?

Re: FortiOS 7.4.2- IPSec tunnel traffic flow stops randonmly

Re: FortiOS 7.4.2- IPSec tunnel traffic flow stops randonmly

Re: SW-WAN Rules failed to save changes

Re: FortiOS 7.4.2- IPSec tunnel traffic flow stops...

Re: FortiOS 7.4.2- IPSec tunnel traffic flow stops...

KCS