Description This article describes the commands needed to initially
determine why port forwarding config is not working. Scope FortiGate.
Solution Make sure that the traffic from outside is reaching the
FortiGate through the use of sniffer. diag snif...
Description This article describes how to troubleshoot when FortiGate
cannot connect to FortiAnalyzer Cloud. Scope FortiGate,
FortiAnalyzer-Cloud. Solution Make sure the FortiGate firmware version
and FortiAnalyzer Cloud version are compatible. Run s...
Description This article describes the steps to automatically block
malicious source IP address(es) triggering IPS. Scope FortiGate.
Solution Automation stitch can automatically block inbound traffic
triggering IPS. Create an address group in Policy ...
Description This article demonstrates how to determine the speed of a
local host to its upstream FortiGate using iPerf3. Scope FortiGate.
Solution Determining the speed between the local host and the upstream
FortiGate is necessary when the host is e...
Description This article describes the initial troubleshooting steps
that users or network/system administrators should do to reduce the
troubleshooting time and downtime. Scope FortiGate. Solution There are
various reasons why a device is unable to ...
Try to upgrade the NIC's firmware first. Next, double check the WiFi's
Advanced settings and set the "Property" to the desired "Value". 1.
Click Start>Run and open devmgmt.msc 2. Collapsed Network Adapters,
right click the Wi-Fi, and click Advanced. ...
VIP are needed only if you want to access certain IP address and you
want to forward specific or all traffic to a different IP address. For
instance, if you want to access the device from outside through your
public IP address -- since it's biometric...
First, I suggest that you verify your current certification status via
training.fortinet.com Next, visit this link for further information: How
to get Certified for Cybersecurity | Fortinet If you have a valid NSE7,
you'll need to take another exam t...
Hello Jesse, Try to see if you have access to FCP - FortiManager 7.2
Self-Paced 1. Open training.fortinet.com 2. Click Login, then Public. 3.
Click Sign Up 4. Browse to Library>FCP Network Security Note: * Access
to FMG training is available based on...