We're having Fortigate 1000F in AP HA cluster. We're having an IPSEC
tunnel with remote location where we have Wireless access points. Those
access points are authorizing clients via NACVIEW radius server which is
located on our side of IPSEC tunnel....
Hello, Few days ago we've started having trouble with our Active Passive
cluster of two 1000F fortigates running 7.2.10 firmware. After making
changes on the primary unit, those changes does not propagate to
secondary and after few minutes we see HA ...
I need to create some kind of notifications that an email with specific
words in subject or in body was sent to any email address. I managed to
achieve it with Archive account. I've created an Archive account which
is forwarding email to another emai...
The problem stopped on it's own after upgrading Firmware to 7.4.7. After
upgrading after few hours devices got synchronizec and they keep synced
all the time even after chaning configuration on primary one. We've
encounter another bug with traffic sh...
As for now we're closing the topic. Due to fact we were able to connect
the remote site via a dedicated L2 Vlan the problem doesn't concern us
anymore. After switching from IPSEC tunnel to normal L2 routing the
problem doesn't exist anymore.
Ports 1-8 were previously used for connecting to switches after we
bought both fortigates and before we recieved 10Gbit DAC cables and they
were all set up for 1Gbit uplinks. So the uplink on port7 between both
FGs is set up to 1Gbit. I have some spa...
1. This is strange because primary is FG1K0FTB23900927 and secondary is
FG1K0FTB23901110. They are connected directly via 25cm rj45 patch cord.
We used to have it connected via dedicated HA port but once the problem
started we've switched it to one o...
This is what I did today. I manually synec both devices so the cluster
is synchronized. I've enabled debuging with these commands on both
fortigates: diag debug app hasync 255diag debug enablediagnose debug
application hatalk -1diagnose debug applica...
