Hi everyone ! I'm facing a very strange issue. I'm running FortiOS
7.0.8. On some of my FortiGate, I can't access to web gui trough LAN
interface. On my browser, I can see the certificate warning and after I
accept it, the donut is running indefinite...
Hi everyone ! I have an issue with FortiManager and CLI Templates. I
have a script and on it an address object target. For example :config
system sdwan config service edit 0 set name "RULE1" set mode sla set dst
"FMG_ADDRESS_OBJECT" ... if FMG_ADDRES...
Hello, I used AD-VPN to Spoke to spoke communication (FortiOS 7.0.7), it
works perfectly excepted when I used SD-WAN. I tried to reach
10.5.5.0/24 via ADVPN and here my bgp routing table, as you can see, I
have 2 path to reach this subnet but onw wit...
Hello, I need to configure with FortiManager script IPSec tunnel
interface IP. For that I need to use a calculated value. I have a meta
with router IP, for example my meta is ROUTER_IP = 10.18.3.1. I wanted
to "transform" this to 172.16.18.3. What I ...
Hello, I have a very strange behavior with FortiClient (version 7.0.7
and EMS 7.0.7). Let me explain : I have an on/off fabric detection rule
(test on Local IP/Subnet) and an auto-connect when off fabric When I'm
Off-Fabric and my VPN starts connecti...
As I can see from my browser, I have some 401 http when trying to reach
web gui page. I have nothing in trusted host or other settings... What's
that ?
Hello, I think it's not a firewall problem but a process problem. As I
said, when I reach web gui from WAN IP (WAN interface) it works and the
immediately LAN access web gui works for a wile.
