Technical Tip: Join FortiAuthenticator to Windows ...

rbraha · 10-06-2025

Description This article describes an issue encountered when synchronizing users as Local using a Remote User Sync Rule after upgrading to FortiAuthenticator v6.6.6. Scope FortiAuthenticator. Solution After upgrading to FortiAuthenticator v6.6.6, syn...

rbraha · 09-02-2025

Description This article describes how to synchronize FortiToken Cloud status in FortiAuthenticator. Scope FortiAuthenticator, FortiToken Cloud. Solution FortiAuthenticator is an identity and access management (IAM) appliance and acts as a central au...

rbraha · 08-19-2025

Description This article describes how to provide remote access to FortiPAM using a FortiGate ZTNA Gateway. Scope FortiPAM. Solution In some scenarios where FortiGate is between an endpoint and FortiPAM, it is necessary to use ZTNA HTTPS instead of T...

rbraha · 07-15-2025

Description This article describe some issue faced when importing users using Remote User Sync Rule after upgrading FortiAuthenticator to v6.6.3. Scope FortiAuthenticator v6.6.3. Solution After upgrading to FortiAuthenticator v6.6.3, users with speci...

rbraha · 06-12-2025

Description This article describes how to fix the error 'FNBAMD_TIMEOUT' when users try to authenticate with an IPsec tunnel using FortiAuthenticator as a RADIUS Server. Scope FortiGate. Solution After configuration of an IPsec tunnel on FortiGate wi...

rbraha · 07-23-2025

Hi @Ketanest On the first screenshot after you are logged in , you should install FortiSRA license , after the license is validated you will be able to access it through vip interface configured on FPAM. Please check installation and licensing guide....

rbraha · 06-24-2025

Hi @AMINE-GHEZALI HA on FortiPAM can be configured on Active-Passive mode ,please check the guide below ,it might help. https://community.fortinet.com/t5/FortiPAM/Technical-Tip-Guide-to-configure-FortiPAM-in-High-Availability/ta-p/392375 https://docs...

rbraha · 06-22-2025

Hi @Jasys You can delete these fields when going to Portals-Replacement Message, edit the selected portal and go in section User Registration , select User Registration Page ,edit the html format with fields that you want to delete and save it.

rbraha · 06-17-2025

Hi, Yes you can create local user in FAC Cloud and assign Fortitoken cloud to them , user will be listed in FTC portal with assigned user, you can scan QR and import in Fortitoken mobile application , l would say first make sure that tunnel is up wit...

rbraha · 06-16-2025

Hi, End users should reside in FortiAuthenticator Cloud side with Radius policies..., when creating user groups in FortiGate you should select remote radius server as FortiAuthenticator Cloud.

User Statistics

User Activity

Technical Tip: FTM provisioning error using LDAP sync rule when importing as local user

Technical Tip: FortiToken Cloud status 'Users-out-of-sync' in FortiAuthenticator

Technical Tip: FortiPAM remote access using FortiGate ZTNA Gateway

Technical Tip: Error importing users using Remote User Sync Rule after upgrading to FortiAuthenticator v6.6.3

Technical Tip: IPsec authentication with FortiAuthenticator as RADIUS server failing with error 'FNBAM_TIMEOUT'

Re: Has Forti SRA different GUIs?

Re: FORTIPAM HA DR MODE

Re: FortiAuthenticator Unable to change Portal Approval message

Re: Ipsec vpn access with fortiauthenticator cloud, fortitoken cloud and EMS

Re: Ipsec vpn access with fortiauthenticator cloud, fortitoken cloud and EMS

Technical Tip: Join FortiAuthenticator to Windows ...

Re: Recommended FortiAuthenticator version

Re: Issue with FSSO Agent Communication on seconda...

Re: Installing FSSO Agent on AD server

Technical Tip: Launch template with view permissio...

Re: integrate FortiGate in Azure Ad to deploy user...

Re: Setting up dialuip ipsec using multiple saml g...

Re: Is it possible to use the FortiToken 410 for a...

Re: Require Message-Authenticator from NAD

Re: #FortiPAM Launcher Multi-Port Configuration

KCS

User Statistics

User Activity

You are leaving our website