We have an old 80C unit with two vdoms for different subnets (10.0.0.0
and 10.1.0.0) and a VDOM link to connect the two. I've gone through
setting up the VDOM link and have assigned an arbitrary address for each
end (10.0.40.10/255.255.255.0 for 10.0...
Turns out the managed switch we were using had a few random ports that
were completely turned off. One of the ports was the one I was using as
the uplink to the Foritigate unit. Thanks for all the help, I'll
remember to check back in with this commun...
So I just corrected the VDOM Link addresses as you suggested. I'm using
10.0.40.10 and 10.0.40.11 instead of having them on different subnets. I
found this article on debug flow which was helpful.
http://kb.fortinet.com/kb/documentLink.do?externalID=...
Thanks for the reply. I should have mentioned that I do have static
routes in place on both VDOMs directing traffic for the appropriate
subnets through the VDOM link interfaces. Policies are also in place and
since it's just internal I have them wide...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
