Hi, We have 2 WAN interfaces, but experience occasional disconnects on
the network. We want to rule out WAN issues and monitor them, but can't
see any option to do so. We have a Fortigate 60F running 7.4.0 build2360
and enabled the SD-WAN feature. Ho...
Hi, We are experiencing issues on our WAN. I wanted to look into the WAN
performance and noticed we haven't really setup any WAN monitoring.
Under SD-WAN (we don't use SD-WAN) I can now see both our WAN interfaces
with upload/download/jitter/latency/...
Hello, We have a Fortigate 100D in our office and created an IPSEC VPN
to our PfSense firewall in the datacenter. The IPSEC is online and the
configured local/remote networks can both access each other. The remote
network is 172.16.0.0/24 (PfSense) a...
Hi, I have an issue in our network where we have a 100D (will be changed
to a 60F soon) and need to pass multicast traffic from VLAN 100 to
VLAN200. The switch network is configured for IGMP snooping and all
switches are set to passive, the core swit...
Hmm, the WAN interfaces are being referenced unforunately.Our internet
connectivity drops for several seconds and then returns, so if we can
determine there is packet loss on the WAN link, that would help us
verify with the provider.We have 2 WAN lin...
Hi Shahan,Just a quick follow-up to the issue - LDAP now can succesfully
reach our AD in the DC. However, when the AD in the DC tries to reach
our local network, it sends the requests through the DMZ instead of the
192.168.10.1 or 192.168.100.1 netwo...
Hi Shahan,Setting the ping-options to source 192.168.10.1 has made the
remote network reachable. I did not know that was a setting...I am
trying to add a new LDAP server for authentication. The current LDAP
server is local, but the new one is in the ...
