2x 300E in HA cluster with BGP, dedicated direct fibre for HA Heartbeat
between units, each unit with WAN (active/passive provided by same ISP)
What do I need to configure for the WAN failover to work? For now I want
to tackle the WAN itself, if prim...
On-prem my users go via Fortigate 300eBut I am getting some WVD VMs in
Azure (student use) Can I use Forticlient & have the same set of
filtering rules to apply there? Seb
How does one change/add ie logo? Or add a background image, Or whatever
more than the minimalistic customization allowed by GUI? Article like
this: https://kb.fortinet.com/kb/documentLink.do?externalID=FD33062
makes zero sense in 6.2.2 because all is...
I was hoping that 10 years later Fortinet eventually managed to pull off
the logical URL access with wildcardsSo was really excited about 6.2.2.
Upgraded today (it did actually fixed constantly broken SSL
connections), but the URL wildcard seems to n...
That is total madness. I can not reboot domain controller TWICE (once
after uninstall & second time after install) How is it that Fortinet
cannot write upgrade routine that (if at all) needs just a single
upgrade? Seb
Well, every server would be behind firewall, at least its own one!I
could never get the firmware 7 to connect on 636 SSL, only 389 insecure
worksAnybody any more useful ideas?
diagnose sys ha reset-uptimeanddiagnose sys ha checksum recalculate I
can run it on current master (secondary unit in ha), but absolutely
nothing happens Rebooted my current slave (Primary unit with higher
priority), still nothing, no master/slave fl...
OK, so the dual connectivity from each FTG would be for a purpose of
only WAN link failing, not the actual any FTG unit failing itself
(because HA cluster can be quite happy itself), right? Seb
I do have a VSF stack of 2 switches (not that cheap) between each
Fortigate and each ISP routerFTG1 -> switch stack - ISP router 1FTG2 ->
switch stack - ISP router 2 In normal condition FTG1 is primary, ISP
router 1 is active & default I can monitor ...
