Hello team,I have some points regarding persistence agent deployments:1-
is a DNS record mandatory or there is a way to configure the agent to
reach FNAC via its IP2- I understand that when registering endpoint as a
host, the device is tied to a user...
Dear Team, I have a scenario in which the customer has two PSTN lines
and want a could based voice solution to be able to receive calls from
PSTN and redirected to the internal extension and implement a call
center. So how this could be implemented w...
Hello Team, Practically when configuring Fortigate as SSL vpn clients,
users behind the client Fortigate can reach hosts behind the server
Fortigate, but the other direction is not working. Moreover, the client
to server direction does not work unles...
Hello Team,I have an FG on 7.0.7 and two swithces 108E-FPOE and 148E
both on the compatible 6.4.4. In a specfici scanarion I needed to
disable the automatic forming of Fortilink trunk between the switches
especially that there are 3rd party network d...
Hello team, I have been studying Fortiweb and some questions arise to me
when I came to the SSL point. Firstly, what is the key difference
between the transparent mode and the True transparent mode?Secondly, I
understood that in SSL inspection, Forti...
Thanks Emirijon for the clarification, I am almost one step close to
remove my confusion regarding this subject. You mentioned that in case
the client in an isolation network, FortiNAC will be handling the SRV
record resolution. After successful regi...
Hi Emirjon,You mentioned the case of a host in an isolation network.In
such case, is it mandatory for the host to download the agent from the
captive portal, and would an Endpoint compliance policy be necessary
prior to the registeration? And could y...
Hi AEK, thanks for replying.So, is editing the registry the only way to
specify the Hostname/IP?What if I configured primary host name and
secondary hostname from the agent properties on FortiNAC, would this
cause the downloaded agents to be preconfi...
Thanks Jeans for the link.However, I need more technical explanation
about how to connect FortiVoice cloud to the PSTN to allow incoming
calls and outgoing calls to and from the PSTN.
