Fortinet Community

msolanki · 03-24-2023

Description This article describes how to enable FortiGate probe traffic on the Azure load balancer. Scope FortiGate. Solution In the Azure load balancer, if the FortiGate-VM probe is enabled, the Azure load balancer sends out a probe to a TCP/UDP po...

msolanki · 12-29-2022

Description This article explains the different sizes of Internet Service Databases (ISDBs) available to use with FortiOS. Scope FortiOS. Solution In the new FortiOS version, ISDBs are categorized in three sizes based on hardware and data file size. ...

msolanki · 11-24-2022

Description This article describes the behavior of traffic selection when multiple zones and members are configured in the rules of an SD-WAN. Scope FortiGate. Solution From FortiOS 7.0.1 onward, SD-WAN functionality supports multiple SD-WAN zones. I...

msolanki · 07-14-2022

Description This article describes when using SNAT IP pool in SSL VPN policy then it has different behavior in some FortiGate versions. Scope FortiGate. Solution Due to recent changes in some OS (6.4.9,7.0.1) behavior because of NAT64/NAT46 if using ...

msolanki · 05-20-2022

Description This article describes the basic difference between NPU vdom link, NPU vdom link with VLAN ID and Vdom link. Scope FortiGate. Solution - NPU Vdom Link. NPU vdom links are in build and the moment you enable multi vdom mode the 'npu0_vlink'...

msolanki · 03-24-2023

I thinks its issue with licensing or activation issue on token not something related to AWS or config . You may refer below KB and verify auth config. https://community.fortinet.com/t5/FortiGate/Technical-Tip-Credential-or-SSL-VPN-configuration-is-wr...

msolanki · 03-08-2023

Hi , Yes its supported 7.0.3 onward. https://docs.fortinet.com/document/forticlient/7.0.0/new-features/651315/fortigate-powered-host-check-for-free-vpn-client-7-0-3

msolanki · 02-13-2023

Yes you can run but you need multiple WAN link to get it test in lab

msolanki · 01-26-2023

Hi HiGio, You can restrict in policy also mean the side were printer and server hosted you can configured only these two IP in destination of firewall policy so when other side user access any other IP policy will get dropped it.

msolanki · 01-26-2023

Hi HiGoi, Not understand your query but if you want to create ipsec site to site VPN and want to use only two LAN IP then you can mentioned them in phase 2 with specific subnet. https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configu...

Fortinet Community

User Statistics

User Activity

Technical Tip: FortiGate-VM probe on Azure load balancer

Technical Tip: Explaining the different internet service database sizes available

Technical Tip: Traffic selection behavior in SD-WAN when multiple zones and members are configured

Technical Tip: SSLVPN webmode behavior with SNAT IPpool

Technical Tip: Difference and understanding between NPU Vdom link, NPU Vdom link with VLAN and Vdom link

Re: How to connect to SSL VPN behind Fortigate

Re: Basic SSL VPN Client and host checks

Re: Fortigate on SD-WAN

Re: Make VPN site to site and show only 2 ip

Re: Make VPN site to site and show only 2 ip

Technical Tip: FortiGate-VM probe on Azure load ba...

Re: 3rd party DDNS configuration on 7.2.1

Re: Fortigate on SD-WAN

Re: 3rd party DDNS configuration on 7.2.1