tino_p
Staff
Staff
‎11-30-2023
Last activity: Nov 30, 2023 11:12:03 AM
100 Profile 100% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

Description This article describes that in a customer's environment where there are several models of Firewall FortiGate, the customer may observe the differences in the number of IPS signatures between those Firewalls, although having the same Forti...
Description This article describes the correct meaning of the feature 'Blocking unwanted IKE negotiations and ESP packets with a local-in policy'. According to Blocking unwanted IKE negotiations and ESP packets with a local-in policy - FortiGate docu...
Description This article describes how to configure the different WAN interfaces (instead of the default route) for SSL VPN connections. In this network diagram: FortiGate firewall has a default route via port1, SSL VPN connections will be configured...
Description This article describes the behavior of choosing ports/interfaces as members of a Hardware switch. Scope All models support Hardware switches. Solution In the test, model 301E is used. Per its datasheet, port1 to port16 are RJ45 interfaces...
Description This article explains why OID .1.3.6.1.2.1.2.2.1.8.X (ifOperStatus) should not be used to check the VPN interface status. Scope FortiGate, SNMP, VPN. Solution 1.3.6.1.2.1.2.2.1.8 (ifOperStatus) is the OID used to check the status of the i...
Kudos given to