Hi all There is a customer that uses tons of 60E and 60F models of each
FortiGates and FortiWifis. I am aware that using a config from one FGT
60F to another FGT 60F (and the same within 60E) should work - but not
from 60F to 60E and vice versa (at l...
Hello everyone We still have some FP421E active which are managed by a
fortigate. We are aware that those are end of support, end of sale, end
of everything... Unfortunately I have difficulties to find an official
(old) compatibility list with these ...
Dear community and support I have troubles running "diagnose
traffictest" on a Forigate 600F with 6.4.14 - I have no idea how to
configure the destination server IP and the port to be used. for the run
command I was using "diagnose traffictest" on Fo...
Hi all This might be an odd question and I might just be too dense to
see the solution. It is not excactly a Fortinet specific question (its
about BGP, routing) - however, since it is realised with Fortigates, I
thought I might ask here as well The s...
Hi allThis might be a silly question: Is there an option in FortiMANAGER
where I can change the default value of "Action" in a newly created
firewall policy.? When creating a new firewall policy in a policy
package on fortimanager, the default value ...
I am sorry - it solved itself.I had to look under FortiAP-W2 (which I
wasn't aware of) -
https://docs.fortinet.com/document/fortiap/6.4.0/fortiap-and-fortios-compatibility-matrix/209640/fortiap-w2
Thank you very much for your reply and I am very sorry for the
duplicate.For some reason I couldn't find the original post and I
suspected that I didnt hit "post" after preparing it. Mea culpa!
Good day Adrian Thank you SO much for your reply.I didn't add the
underlay (internet connection) as SDWAN zone. I first tried to just add
the IPsec tunnels to a SD-WAN Zone and gave them (in the SD-WAN-Zone as
members) a fake/dummy IP address. And th...
