Description This document describes how to configure the SSL-VPN with
Split tunnel configuration in which the firewall address configured
becomes a trusted destination that will not be tunneled through SSL-VPN.
All other destinations will be tunneled...
Description This article describes how to configure Admin login-logout
Automation Stitch with an email notification action. The main use case
is to be notified by email if any admin login to the firewall or logout
from the firewall. Scope FortiGate. ...
Description This article describes how to configure local certificate
expiry Automation trigger with an email notification action. The main
use case is to be notified by email if any local certificate is
expiring, so the certificate can be changed be...
Description When the PPPOE link is configured with HA, sometimes the
issue that the link will not come up, even if the configuration is
correct. It will only send the Initial Broadcast message (PADI Message)
without any response. Scope 6.0.x onwards....
Description This article explains describes how to download the
Forticlient VPN manually from the Fortinet website. Scope Solution Go to
support.fortinet.com, then login. Go to Support -> Firmware Download.
Select the product as Forticlient (It is ma...
Hello 6sITdept, If you're not using l2tp in your network then I'll
suggest disabling the l2tp, it will resolve your issue, config vpn l2tp
set status disable end To check you can use the below commands: diagnose
debug enablediagnose vpn l2tp statusdi...
Hello Fred, Go to Network >> Interface and click on the reference number
for wan 1 You'll be able to see something like below, once you select
the object you'll be able to edit and delete it. In this config because
of firewall policy is using port1 I...
Hello hhajj, Can you confirm if you have followed the correct steps as
mentioned in the below
link.https://docs.fortinet.com/document/fortianalyzer/6.4.0/new-features/367769/throughput-utilization-billing-reporting-6-4-3Also
please please confirm the...
Hello 6sITdept, Can you check if L2TP is enabled on the firewall or not
also confirm if are you using L2TP in your network. show vpn l2tp show
full | grep -f l2tp