Description This article describes a configuration where the FortiGate
has captive portal authentication enabled on multiple interfaces and the
captive portal redirects to a single FQDN that is associated with a
local Loopback interface. This configu...
Description This article describes a known behavior of the
FortiGate-200F/201F models where 10Gbps SFP+ optical transceivers
continue to transmit signals even when the interface is administratively
shut down or when the FortiGate is rebooted. In some...
Description This article describes how to configure a basic NAC policy
setup on the FortiGate and managed FortiSwitch that allows users to
authenticate to a captive portal and be assigned to a corresponding
VLAN. Scope FortiGate, FortiSwitch, NAC Pol...
Description This article discusses AES-GCM encryption on the FortiGate
in reference to IKE/IPsec tunnels. More specifically, this article
discusses how AEAD algorithms ('Authenticated encryption with associated
data', like AES-GCM) require a 'None' I...
Description This article describes a known behavior with NGFW
policy-based mode where using a certain combination of Application
signatures and settings in Security Policies can result in traffic not
matching those policies. The following are a list ...
Sorry to necropost, but just to let you know: we've taken your feedback
and had our documentation team update the FortiWiFi/FortiAP
Configuration Guide to better explain the extra steps involved for
LAN-only FortiAPs vs. WAN-LAN equipped FortiAPs.As ...
Piggybacking on what @cyberadius suggested above, we have the following
Community KB articles that cover similar info (I'll leave them here for
future reference): Technical Tip: How to prevent the SSL VPN web login
portal from displaying when SSL VPN...
Hi @SajjadAli-1986, Just to let you know, this is the Article Ideas
Submission queue, which is used to submit new KB article ideas. For
technical assistance, please either post to the Fortinet Support Forum
or open a ticket with Fortinet TAC Support....
Hi Faiza_Emam_Delhi, can you clarify where (FortiGate, FortiSwitch
directly, FortiManager, etc.) and on what firmware you were able to
perform these steps? I checked on FortiOS 6.4, 7.0, 7.2, and 7.4, and
none of them have the capability that you are...
I recommend checking out these Community KB articles for SSL-VPN and
IPsec:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Enabling-split-tunnel-feature-for-SSL-VPN/ta-p/198108https://community.fortinet.com/t5/FortiGate/Technical-Tip-Enable...
