Technical Tip: RADIUS RADSEC Authentication fails ...

blarochelle · 11-20-2024

Description This article describes how to retrieve the user account used when joining FortiNAC to the domain using the Winbind service. Scope FortiNAC-F all versions. Solution The Winbind configuration is saved within the database's WinbindConfig tab...

blarochelle · 10-15-2024

Description This article describes how to resolve FortiNAC dropping RADIUS RADSEC packets due to 'invalid Message-Authenticator! (The shared secret is incorrect.)' errors are seen in radius.log. Scope FortiNAC-C, FortiNAC-F versions v7.2.1+, v7.4+,v ...

blarochelle · 07-23-2024

Description This article describes how to identify the parameters the Persistent Agent scan has configured in Policy & Objects -> Endpoint Compliance -> Scans checks on the client, and how to check those parameters in the client's Windows registry. S...

blarochelle · 03-21-2024

Description This article describes how to identify the group selected in the 'Email Group' field during Report Schedule creation after the scheduled task has already been created. Scope FortiNAC-C / FortiNAC-F All Versions. Solution From this view, i...

blarochelle · 03-21-2024

Description This article describes how to correct the 'Failed to retrieve Activities' error in System -> Scheduler. Scope FortiNAC-C / FortiNAC-F All Versions. Solution The following error can be disabled in System -> Scheduler due to an error in the...

blarochelle · 03-11-2022

Think we can break down step 1 to 2 steps.1. Enter the command: vi -c "%s/Status=2/Status=1/g|wq" /bsc/campusMgr/bin/.networkConfig 2. Repeat this on all 4 appliances

User Statistics

User Activity

Technical Tip: How to find the userId of the account used to join Winbind

Technical Tip: RADIUS RADSEC Authentication fails with Shared secret is incorrect error

Technical Tip: Identifying parameters Persistent Agent scan checks on client and how to check them in Windows registry

Technical Tip: Identifying the group selected in the 'Email Group' field during Report Schedule creation

Troubleshooting Tip: How to correct the 'Failed to retrieve Activities' error in System -> Scheduler

Re: Technical Note: Manual High Availability (HA) restore in a L3 environment via CLI

Technical Tip: RADIUS RADSEC Authentication fails ...

Technical Tip: Identifying parameters Persistent A...

KCS