Re: FortiAP disable bluetooth

sidewaysguy14 · 11-22-2022

No problem at all! Have a look at the ISDB Rep DB entries as using the Botnet/Malicious/Phishing entries as top global deny policies would also help either for inbound server VIPs or for blocking traffic from external bound traffic from users clickin...

sidewaysguy14 · 11-16-2022

No problem @Telcovisionamos!

sidewaysguy14 · 11-16-2022

No problem!  That's good to know.  :)

sidewaysguy14 · 11-15-2022

Hi @FGTuser0 In general yes that would be correct, with you selecting the IP Pool in the IPv4 policy. I think the first thing to confirm is your actual subnet info as when I double-checking the usable range would be x.x.x.65-x.x.x.70 for the x.x.x.64...

sidewaysguy14 · 11-14-2022

Are the IP's in the same subnet? If so I'd configure the subnet on the wan interface with the first IP and provided subnet mask. Use an IP Pool specifying the second IP address and use it in policy for the single device. In this case, if you needed t...

User Statistics

User Activity

Re: Questions Regarding SolarWinds-SpamExperts

Re: Change member interface to another SD-WAN zone

Re: FGT 60F with 2 IPs on WAN1 and want to use them both

Re: FGT 60F with 2 IPs on WAN1 and want to use them both

Re: FGT 60F with 2 IPs on WAN1 and want to use them both

Re: FortiAP disable bluetooth

Re: FGT 60F with 2 IPs on WAN1 and want to use the...

Re: Change member interface to another SD-WAN zone

Re: PING Through an SD-WAN Fortigate with 2 ISPs.

Re: FGT 60F with 2 IPs on WAN1 and want to use the...

Re: Questions Regarding SolarWinds-SpamExperts

KCS

User Statistics

User Activity

You are leaving our website