About Rahulv

Rahulv · 01-05-2024

Description This article describes the Onsight discovery and discovery rule configuration. Scope FortiMonitor, Onsight, Auto-discovery. Solution Onsight auto-discovery: It is a feature that helps in discovering network devices and servers in the netw...

Rahulv · 05-17-2023

Description This article explains two methods to delete users from FortiMonitor. Scope FortiMonitor, Users. Solution Method 1: The first method explains deleting users from the FortiMonitor control panel. Navigate to: Settings -> Users, Groups & On-C...

Rahulv · 07-24-2022

Description This describes what SNMP heartbeat (HB) Alerts are and where it would be visible on the network instance. Scope FortiMonitor, SNMP, Heartbeat Solution What are SNMP Heartbeat Alerts? - SNMP Heartbeat Alerts are specific to instances and t...

Rahulv · 07-13-2022

Description This document will help in troubleshooting/isolating the issue with the connectivity between our Onsight and a network device. Scope FortiMonitor, Onsight, Network Devices. Solution Few considerations of network topology: 1) FortiGate and...

Rahulv · 06-29-2022

Description This article describes how FortiMonitor handles the incidents created via SNMP traps. Scope FortiMonitor. Solution SNMP stands for Simple Network Management Protocol and is used to monitor and manage network devices. It is one of the comm...

Rahulv · 04-19-2023

Hello,Currently, there are two ways to remove the tags in bulk.1. You could either use the APIs to remove them. To read more about APIs please refer to the link[a].2. Or if the tag is no longer needed you can delete them. On the FM control panel. Nav...

Rahulv · 01-04-2023

Hello Ranjith, Thank you for your message. I would kindly request you to create a support ticket to further investigate the issue. While creating the ticket you would require FortiMonitor's serial number, which can be found by following the below ste...

Rahulv · 12-29-2022

Hello Ranjith, There are two ways to discover the SD-WAN interface in FortiMonitor. 1. You can either add the FortiGate via SNMP[1]. 2. Or you can add the FortiGate via Fabric connection[2]. In both scenarios, the FortiMonitor platform will display t...

User Statistics

User Activity

Technical Tip: FortiMonitor Onsight discovery rule

Technical Tip: Delete user from FortiMonitor

Technical Tip: SNMP Heartbeat Alert

Technical Tip: Troubleshoot connectivity between Onsight and FortiGate

Technical Tip: SNMP traps Incident handling

Re: Bulk tag removal

Re: Fortimonitor discover SD-Wan Interface

Re: Fortimonitor discover SD-Wan Interface

KCS