Description This article describes one of the possible reasons why video
or web pages are slow or fail to load. Scope FortiGate. Solution
Slow/failed to load a video/YouTube page: Debug flow shows that traffic
for this source IP address has exceeded ...
Description This article describes how to allow WhatsApp QR code to load
in WhatsApp Desktop Application with Collaboration category in
Application Control profile blocked. Scope FortiGate. Solution Failed to
load QR code in WhatsApp Desktop Applicat...
Description This article describes the scenario when it is not possible
to set an interface as an outgoing interface in the firewall policy
using GUI with an error of 'Input value is invalid'. Scope FortiGate.
Solution Port3 and Port4 will be used as...
Description This article describes how to get IPS installed information
via CLI. Scope FortiGate. Solution Type in this command: Press 'Enter',
and information of the installed IPS will be shown.
Description This article describes how to add 'Inspection Mode' filter
for a quick check. Scope FortiGate. Solution Default view: Select the
gear icon by hovering over the naming table: Select 'Inspection Mode'
and select 'Apply': 'Inspection Mode' i...
Hi @jomof , Is this HA directly connected or they are going through a
switch etc? You may refer here how to troubleshoot the HA heartbeat
packet lost:
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-How-to-troubleshoot-HA-Heartbeat-pa...
Hi @Saad1 You can create a custom IPS signature. Please refer here:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-custom-IPS-signature-for-a/ta-p/207522
I did observe the same issue in my lab for version 7.2.7 however upon
upgrading to 7.4.3 this is the output of dayst-info # dia sys
dayst-info The current timezone '(<+0330>-3:30 Asia/Tehran)' doesn't
have daylight saving time.
Hi @goftari, To force an update with the Fortiguard NTP server, you can
use the command "#execute update-now". After running the command, check
if the time is correct by using "#execute time".