Most Liked Posts Recent Solutions
No Content Available

User Activity

Description This article describes how to enable the 'reply-to' if using FortiOS 7.0.8 and above. Scope FortiOS 7.0.8 and above. Solution The command 'set reply-to' used to be available by default: Since FortiOS 6.4.10 and 7.0.8, when the default 'no...
Description This article describes the additional configuration needed when the route check-in SD-WAN rules are disabled Scope FortiGate. Solution By default, each SD-WAN rule is expected to have a matching route in the routing table, as the SD-WAN r...
Description This article explains how to work around lack of support for Route leaking for the default VRF 0. Scope FortiGate/FortiOS 7.0.6 and FortiOS 7.2.1. Solution Route leaking between default VRF 0 and other VRFs is currently not supported. To ...
Description This article describes how to fix the 'Max Session Reached' message. Scope FSSO Solution One of the reasons the FSSO users' information is not being sent to FortiGate or the Monitored DCs list is empty, could be due to the message 'Max Se...
Description This article describes how to set up the FortiGate as a L2TP client. Scope Small business FortiGate units such as 30E, 40F, 100F. Solution The FortiGate can be set up as a L2TP client only through CLI as follows: Note: This is only availa...
Kudos from