Technical Tip: How to configure multiple interface...

vpoluri · 10-08-2020

DescriptionThis article describes how to configure email alert, when the interface status changes, using automation stich feature.SolutionIn 6.4.x, an automation stich 'Network down' is available under Security Fabric -> FortiOS Event Log.By default,...

vpoluri · 09-29-2020

DescriptionThis article explains how to enable 'Certificates' feature in a FortiGate.SolutionFrom GUI.Go to System -> Feature Visibility -> Additional Features and enable 'Certificates'.

vpoluri · 12-04-2017

Description This article provides basic troubleshooting when the logs are not displayed in FortiView.Useful links: Logging FortiGate trafficLogging FortiGate traffic and using FortiView Scope FortiGate, FortiView. Solution Log traffic must be enabled...

vpoluri · 09-05-2017

Description By default on the firewall policy GUI, multiple interfaces can not be set. This article describes how to enable this feature. Scope FortiGate. Solution This feature can be enabled by CLI. config system settings set gui-multiple-interface-...

vpoluri · 08-30-2017

Description This article explains using Syslog/FortiAnalyzer filters to forward logs for particular events instead of collecting for the entire category. Scope FortiGate. Solution The CLI offers the below filtering options for the remote logging solu...

User Statistics

User Activity

Technical Tip: How to configure email alert when interface status is changed

Technical Tip: Enable 'Certificates' feature

Troubleshooting Tip: FortiGate - Logs are not displayed in FortiView

Technical Tip: How to configure multiple interfaces on a firewall policy (GUI)

Technical Tip: Using filters to send only specific logs to the remote logging solution

Technical Tip: How to configure multiple interface...

Technical Note: How to clear the crash log

Troubleshooting Tip: FortiGate - Logs are not disp...

KCS