Troubleshooting Tip: FortiGate - Logs are not disp...

vpoluri · 10-08-2020

DescriptionThis article describes how to configure email alert, when the interface status changes, using automation stich feature.SolutionIn 6.4.x, an automation stich 'Network down' is available under Security Fabric -> FortiOS Event Log.By default,...

vpoluri · 09-29-2020

DescriptionThis article explains how to enable 'Certificates' feature in a FortiGate.SolutionFrom GUI.Go to System -> Feature Visibility -> Additional Features and enable 'Certificates'.

vpoluri · 12-04-2017

Description This article provides basic troubleshooting when the logs are not displayed in FortiView Useful links: Logging FortiGate trafficLogging FortiGate traffic and using FortiViewSolution Log traffic must be enabled in firewall policies: #confi...

vpoluri · 09-05-2017

Description By default on the firewall policy GUI, multiple interfaces can not be set. This article describes how to enable this feature. Solution This feature can be enabled by CLI. config system settings set gui-multiple-interface-policy enable end...

vpoluri · 08-30-2017

Description This article explains how to use Syslog Filters to collect logs to syslog for particular events instead of collecting for the entire category. Scope FortiGate. Solution There are two filtering options available for Syslog and these have t...

User Statistics

User Activity

Technical Tip: How to configure email alert when interface status is changed

Technical Tip: Enable 'Certificates' feature

Troubleshooting Tip: FortiGate - Logs are not displayed in FortiView

Technical Tip: How to configure multiple interfaces on a firewall policy (GUI)

Technical Tip: Using syslog filters on to send only specific logs to syslog server

Troubleshooting Tip: FortiGate - Logs are not disp...

Technical Tip: How to configure multiple interface...

KCS