Technical Tip: A command to check the beacon failu...

vinodhk · 12-31-2024

Description This article describes which command can be used to check the drops/packet loss on the interfaces of the FortiExtender. Scope FortiExtender, Troubleshooting Solution Following commands will be helpful when troubleshooting for packet loss ...

vinodhk · 12-26-2024

Description This article provides commands that need to be collected from the FortiExtender Command Line Interface to provide more information for the Technical support team when creating a new ticket. Scope FortiExtender. Solution Login to the Forti...

vinodhk · 12-26-2024

Description This article describes how to troubleshoot when the modem status on the FortiExtender shows as 'Resetting or Not inserted'. Scope FortiExtender. Solution Power off the FortiExtender for at least 3 to 5 mins and then power on the device: U...

vinodhk · 11-04-2024

Description This article provides the command in the FortiWireless Controller, which can be used to Enable/Disable the WebCLI option. Scope AP, FortiWLC, Wireless Troubleshooting. Solution WebCLI is the Command Line interface window which can be open...

vinodhk · 09-29-2024

Description This article describes how the proxy ARP can be enabled on the APs per SSID when the APs are managed by the Wireless Controller. Scope Proxy ARP, Wireless Troubleshooting, SSID, AP. Solution Proxy ARP can be enabled per SSID on the AP CLI...

vinodhk · 10-24-2022

Hi, -- Please make sure that the AP is able to ping the Fortigate Ip address and vice versa. this is to confirm the communication is working between the 2 x devices. -- If the AP and Fortigate are in different subnet then UDP ports 5246 & 5247 has to...

User Statistics

User Activity

Troubleshooting Tip: Command used to check the drops/packet loss on the interfaces of the FortiExtender.

Troubleshooting Tip: FortiExtender side Command Line Interface commands to open a new ticket with Technical Support

Troubleshooting Tip: In FortiExtender 'get modem status" shows as Resetting or Not inserted.'

Technical Tip: How to Enable/Disable the Webcli option on the FortiWireless Controller

Troubleshooting Tip: What is the command to enable/disable proxy arp on SSIDs when APs are managed by Wireless Controller

Re: Problem linking FortiAP with Fortigate VM as controller

Technical Tip: A command to check the beacon failu...

Troubleshooting Tip: FortiExtender side Command L...

Troubleshooting Tip: In FortiExtender 'get modem ...

Technical Tip: How to Enable/Disable the Webcli op...

Troubleshooting Tip: What is the command to enabl...

KCS

Fortinet Training Institute

User Statistics

User Activity

You are leaving our website