Fortinet Community

tana · 03-15-2023

Description This article describes how to check the FortiAuthenticator ARP table on the OSI layer 2 link negotiation or to flush the ARP table. Refer to the below steps to check or flush ARP table in FortiAuthenticator. Scope FortiAuthenticator. Solu...

tana · 02-07-2023

Description In some cases, the FortiGate detection will show the wrong vendor information. This article will help to update the vendor information on FortiGuard Device Detection Service: Scope FortiGate Device Detection. Solution Check on the FortiGu...

tana · 01-11-2023

Description This article describes that it is possible to encounter this problem when using an Android device connecting to the SSL VPN with two-factor authentication. The connection attempts will fail before getting the two-factor code. Scope FortiG...

tana · 11-30-2022

Description This article describes how to check interface information (e.g link status) via CLI There are times when it is required to check interface link status via the command line interface (CLI) only. Scope FortiGate interface management. Soluti...

tana · 10-06-2022

Description This article explains how to limit IP addresses that can reach the administrative interface of FortiProxy. This procedure will limit the FortiProxy administrative access to specific range of IP addresses on specific interface. Scope Forti...

Fortinet Community

User Statistics

User Activity

Technical Tip: ARP troubleshooting on a FortiAuthenticator

Technical Tip: How to submit dispute form for incorrect device vendor information from device detection service

Troubleshooting Tip: Android device SSL VPN Connection Failed with two factor authentication enabled

Technical Tip: How to check interface information (e.g link status) via CLI

Technical Tip: How to limit IP addresses that can reach the management interface of FortiProxy