Most Liked Posts Recent Solutions
No Content Available

User Activity

Description This article discusses the configured policy route types in the policy route table. Scope FortiGate. Solution There are 3 types of policy routes displayed in the Policy Route Table (Regular policy route, ISDB route, and SD-WAN rules). dia...
Description This article describes how the 'set interface' and 'set update-source' BGP commands operate on a FortiGate device. Scope Any supported version of FortiGate. Solution Using set interface : config router bgp set as 65412 set router-id 1.1.1...
Description This article describes VIP (DNAT) behavior when the ip address not available on the mapped range. Example: config firewall vip edit "Test" set extip 10.1.1.1-10.1.1.10 <----- Vip has 10 IP address. set mappedip "20.0.0.1-20.0.0.10" <-----...
Description This article describes controlling the received routes from the local device. Scope Fortigate Solution This feature is used to reduce the system resources on the firewall that is not accepting full routes from the neighbour. The FGT2 shou...
Description This article describes how to disable IPv6 redirect. Scope icmp6-send-redirect is enabled by default and it will redirect the traffic to a more efficient way. The ICMPV6 traffic thus does not pass through FortiGate nor match policy6. Solu...
My Accepted Solutions